home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 13
/
QRZ Ham Radio Callsign Database - Volume 13.iso
/
modfiles
/
ts50_1.txt
< prev
next >
Wrap
Text File
|
1999-04-07
|
1KB
|
36 lines
Subject: TS50 extended xmit
Original from KA4RKT to MODS@ALLUS
I just got a spanking new Kenwood TS-50S, and boy is it a beauty!
Even fits under the dash of my compact car...
Searching around the local LLBBS's I found a very simple mod for
full transmit from 1.7 - 30 mhz....
Remove the bottom cover of the TS-50
Locate the PLL board -- it is the pc board on top of the main board,
it has a shield on it's right side.
Locate the only non-surface mounted component on the PLL board --
look near the rear left-hand side of the pll board
(front of radio facing you) and remove the very
obvious diode. You can't miss, ther's only one.
Replace cover.
Perform microprocessor reset as described in your manual.
Please -- This mod for use only by persons authorized to use those
frequencies outside of the ham bands - such as MARS, CAP
and such. This radio is not type accepted for commercial
use outside of the ham bands....
Tom
KA4RKT @ WB4TTZ-1
co-sysop tn message switch